当前位置:首页 > 科学研究 > 电子编程 > 正文内容

Arduino Project 005 - LED Chase Lights

RonWang1年前 (2024-06-18)电子编程364

You’re going to use a string of LEDs (10 in total) to make an LED chase effect, similar to that used on the car KITT on Knight Rider or on the face of the Cylons in Battlestar Galactica. This project will introduce the concept of arrays.

项目5 Project 5-LED Chase Effect

05 LED Chase Effect Circuit

/* Coding Ron Wang
   June 18th 2024
   Autaba support for coding hardware
 */
// Project 5 - LED Chase Effect

byte ledPin[] = {4, 5, 6, 7, 8, 9, 10, 11, 12, 13}; // Create array for LED pins
int ledDelay(65); // delay between changes
int direction = 1;
int currentLED = 0;
unsigned long changeTime;
void setup() {
 for (int x=0; x<10; x++) { // set all pins to output
 pinMode(ledPin[x], OUTPUT); }
 changeTime = millis();
}
void loop() {
 if ((millis() - changeTime) > ledDelay) { // if it has been ledDelay ms since last change
 changeLED();
 changeTime = millis();
 }
}
void changeLED() {
 for (int x=0; x<10; x++) { // turn off all LED's
 digitalWrite(ledPin[x], LOW);
 }
 digitalWrite(ledPin[currentLED], HIGH); // turn on the current LED
 currentLED += direction; // increment by the direction value
 // change direction if we reach the end
 if (currentLED == 9) {direction = -1;}
 if (currentLED == 0) {direction = 1;}
}

版权声明:本文为原创文章,版权归donstudio所有,欢迎分享本文,转载请保留出处!

本文链接:http://parentscn.com/?id=255

标签: Arduino

相关文章

Arduino Project 027 - Joystick Servo Control

Arduino Project 027 - Joystick Servo Control

In this tutorial, we are going to learn how to use Arduino and a joystick to control two servo motor...

Arduino Programming Basic - If and Loop

Arduino Programming Basic - If and Loop

Arduino 程序基础,介绍Arduino程序的基本组成,第一部分编写了10个例子,关于变量及变量名称,串口监视器,if循环,for循环,while循环等。第二部分介绍了函数,全局变量,局部变量和静...

Arduino Project 023C - Liquid Crystal Displays - Serial to Display

Arduino Project 023C - Liquid Crystal Displays - Serial to Display

Before wiring the LCD screen to your Arduino board we suggest to solder a pin header strip to the 14...

Arduino Project 007 - Pulsating Lamp

Arduino Project 007 - Pulsating Lamp

You are now going try a more advanced method of controlling LEDs. So far, you have simply turned the...

Arduino Project 014 - Light Sensor

Arduino Project 014 - Light Sensor

This project introduces a new component known as a Light Dependent Resistor, or LDR. As the name imp...

Arduino Project 032 - BMP280 Pressure Sensor LCD Display

Arduino Project 032 - BMP280 Pressure Sensor LCD Display

For this project we will use Arduino Uno and BMP280 along with LCD 16x2 display module to display te...